Android MDE Gerät

LogiScan-1460 with Pistol Grip
LogiScan-1460, front
LogiScan-1460, perspektive


Handheld with Android 11

The LogiScan-1460 is a universal mobile computer for various data collection operations, such as retail, logistics, warehousing, and stores, providing users with the ultimate efficiency improvement. This device can accomplish your daily tasks with the power of a octa-core processor and Android OS, a high-quality, high-speed 1D/2D scanner. It is equipped with enterprise Wi-Fi+4G/LTE guarantees speed stable network environment.

  • Reader-1D
  • Reader-2D
  • WLAN
  • GPRS
  • USB
  • Bluetooth
  • GPS
  • Light-Sensor
  • Proximity-Sensor
  • Acceleration-Sensor
  • Camera
  • NFC
  • LTE-4G
  • IP65
CPUOcta-core 2.0 GHz
Operating SystemAndroid 11
Memory (ROM + RAM)16GB +2GB (optional 32GB + 3GB /64GB + 4GB/128GB + 6GB)
Expansion SlotMicro SD card, up to 256GB
Display4-inch, 800 x 480 IPS
Touch PanelIndustrial-grade capacitive panel, supporting operation with gloves (material-dependent)
Camera8 MP (optional 13MP) autofocus camera in the back side, autofocus lens, LED flash, supporting PDAF,Highlight flash
Flash light800 mA
Keyboard lightWhite
Keypad26 durable industrial keypads with interior transmission light
Battery3.8 V 4400 mAh rechargeable lithium polymer battery, powerbackup support
AudioBuilt-in microphone
NotificationScanning prompt LED/ Charging prompt LED/ Vibrator alerts
Vibration MotorBuilt-in programmable vibration motor
Dimension (L x W x D)168 x 71 x 26 mm
Weight270g (battery included)
Wireless WAN (Network frequency)2G: B2/B3/B5/B8; 3G: WCDMA: B1/B5/B8 CDMA&EVDO: BC0 TD-SCDMA: B34/B39; 4G: FDD-LTE:B1/B3/B5/B7/B8/B20 TDD-LTE:B34/B38/B39/B40/B41
Wireless LANWi-Fi 802.11a/b/g/n/r/ac (Dual-band Wi-Fi: 2.4G+5G) Wi-Fi 5G PA amplifier
BluetoothBluetooth 5.0 LE
GPSGPS/AGPS/Glonass/BEIDOU/GALILEO/QZSS; Target SNR≥39 dB (Signal level -130 dBm)
SensorsG-Sensor, proximity sensor, light sensor, geomagnetic, gyroscope
Development ToolsAndroid SDK + JDK + Eclipse
Programming LanguageJava
Operating Temperature-20ºC ~ 60ºC
Storage Temperature-40ºC ~ 60ºC battery included; -40ºC ~ 70ºC battery not included
Relative Humidity0 ~ 95 % (non-condensing)
Drop Specification1.5-meter drops to concrete ground
Electrostatic Discharge Conforms to ±15 kV air discharge, ±8 kV direct discharge
Optical Resolution≥4 mil
Scan Depth of Field3.81 cm – 60.98 cm
Scan Angle47º ± 3º (Standard)
Scan Speed102 ± 12 scans/sec. (Bidirectional)
Optical Resolution≥3 mil
Scan AngleOmnidirectional
Scan Speed300 scans/sec.
Supported SymbologiesAztec Code, Codabar, Codablock F, Code 11, Code 128, Code 2 of 5, Code 39, Code 93, Data Matrix, EAN/JAN-13, EAN/JAN 8, EAN-UCC Composite Codes, EAN-UCC Emulation, IATA Code 2 of 5, Interleaved 2 of 5, Matrix 2 of 5, MaxiCode, MicroPDF417, MSI, PDF417, Postal Codes ( Australian Post, British Post, Canadian Post, China Post, Japanese Post, Korea Post, Netherlands Post, Planet Code, Postnet ), Plessey Code, PosiCode, QR Code, RSS Expanded, RSS Limited, RSS-14, TCIF Linked Code 39, Telepen, Trioptic Code, UPC-A, UPC-E, etc.
Frequency13.56 MHz
Reading DistanceWithin 30 mm
USB Port1, 2 pin Charger Port
Charger PortType-C, headphone
StandardBattery, Power adapter, Wrist strap, Hand Strap, Bottom charging cable, USB cable
OptionalPistol grip
General Downloads
  • Contains the user manual for the Android apps devin, aiBrowser and aiInventur, which are preinstalled on every Android-based LogiScan at delivery.

  • This demo application shows in which way mobile terminals with DECT radio communicate directly with a MSQL database.

Android Apps
Communication Software
  • MTPWin

    MTPWin provides functions for configuration / synchronization of mobile android-based data entry devices of the series LogiScan with a Windows PC. This requires the integration of MTPWin functionality in the corresponding Android data acquisition app.

Barcodes Android-based LogiScan LogiScan-600/800/1100

We want to introduce barcode recognition in our company. Which barcode type should we choose?

The different barcode types differ in some cases substantially in terms of the character size, the information density, the max. Number of codable characters and security. While 1D barcodes can be read by almost all barcode readers (1D and 2D barcode scanners) 2D barcode scanners are required for 2D barcodes. All these characteristics and criteria must be taken into account when bar codes are to be used in a company.

Read more ...

Android-based LogiScan

How should a device be stored when it is not used for a long time?

For certain applications (e.g., inventory) the devices are used only once a year for a few days. If a device is not used for an extended period of time, appropriate precautions should be taken. The battery should be fully charged before storage and then removed from the device. The battery must be recharged after 12 months at the latest, as it will discharge itself during the rest period. Within three months, depending on the temperature, up to 80% of the charge will be lost. At high temperatures, the discharge is correspondingly faster. The ideal temperatures for an unused battery are between 15° C and 30° C. Large temperature fluctuations are generally detrimental to batteries and should be avoided.

How can I make a screenshot?

Press the power button and the button on the left side of the unit. When capturing the screenshot, a frame around the screen is displayed, a camera sound is emitted and an info is displayed in the notification bar. The screenshot file is stored in the directory Pictures/Screenshots.

What can I do if there are problems with wireless reception?

Install the app "Fritz WLAN" from the Google Playstore and start it.

Under the tab "Environment", you can see if there are other WLAN access points in the environment and which channels are used by them. Set up a channel on your WLAN access point that is still free (can be done at the WLAN access point with the appropriate administration tool) or on which a remote WLAN access point with a corresponding low signal strength is sent.

Under tab "My WLAN", the signal strength is recorded over time. When you move around with the unit in the room, you can check the reception in various places.

How can I extend the battery life?

The following power tips may help your device consume less power and thus be usable longer.

  • Decrease the display brightness.
  • Set the display timeout to the lowest possible value.
  • Disable permanent Internet connections.
  • Disable UMTS connections (WCDMA) if not needed.
  • Disable GPS, WLAN and Bluetooth when not needed.

How can I accept bar code or RFID data in the input field of an app?

The Android app devin can be used for this. Devin allows to transfer the data scanned by the barcode scanner or RFID reader of a LogiScan-15xx to the keyboard buffer or the clipboard of Android. Alternatively, a broadcast message is also possible. Thus, barcode scanners and RFID readers can serve as a data source for each app.

How can I install an Android app outside Google Playstore?

Android installation packages have the extension "apk". If you see such an Android installation packag file with the File Explorer or the Internet browser, the installation is started by tapping the file name.

How can I restart the device?

Press the power button until a menu appears. Select "Restart" from the menu.

What do I need to develop my own Android app?

As a development environment, Android Studio (can be downloaded free from the Android website). A description of Android Studio's main features includes the App Development for Android page.

The corresponding SDK is required for the relevant target platform. This can be downloaded from the product page of the respective device.

The Android app devin is available for LogiScan-15xx devices. This provides a convenient software interface to barcode and RFID readers. For a detailed description, refer to devin.

What is ADB?

The ADB (Android Debug Bridge) is a software interface between the PC and the Android device. The ADB allows direct communication between the two devices. This includes a file transfer function as well as the ability to run commands on the Android system via ADB and to access components of the system. The ADB can be started and operated via the Windows console "cmd". To be able to use ADB

  • under Settings→About device, tap Build number repeatedly (about 5 times) until "You are now a developer" appears,
  • under Settings→Developer Options→USB Debugging.
  • ADB to be installed on the PC. A freely available widespread ADB tool is e.g. "Minimal ADB and Fastboot".

What to do if the subdirectories of the "aitronic" directory are no longer displayed via MTP?

Delete the "storage" directory. This deletes all files generated from the database. However, the database is preserved.

Why can't I use my camera when devin is activated?

For communication with camera, bar code scanner and RFID reader is used by Android the same serial interface. If devin is activated, the relevant serial interface is switched to barcode scanners or RFID scanners. Therefore, Android can not access the camera. However, in order to make the camera available, the keycode of a key must be defined in devin under "Function → Disable devin via Key", which temporarily deactivate devin before the camera is used. As soon as one of the devin-defined scan buttons is pressed, the activation of devin is activated again.

What is the Android App ScannerDemo for?

The ScannerDemo app is used to demonstrate the integrated barcode scanner / RFID reader and includes functions such as scanner / RFID module on / off, scanning of barcodes / RFID tag and output of the scanned codes with the preceding type.

How can I exit the aiBrowser or other aitronic apps?

The aiBrowser and other aitronic apps can be exited by the appropriate admin menu function (the admin menu is password-protected).

Barcodes LogiScan-600/800/1100

How can I read barcodes with a LogiScan-600/800/1100 without special application?

  • Call up the system menu on the LogiScan-600/800/1100 (refer to corresponding FAQ).
  • Call menu function Test→Code/RF-ID. "Barcode Test" is displayed in the title line.
  • All barcode types activated in the scanner module can now be scanned. The corresponding barcode type is displayed.


How to avoid read errors when scanning barcodes of type Code 2/5 interleaved?

If this barcode type is set and no further check is carried out (neither by the scanner nor by the application), a very high error rate must be expected. The following measures should be taken:

  • If possible, use a check digit.
  • Use a length fixation. That means, only barcodes with one or two lengths are accepted by the scanner.
  • If there is a constant number of digits within the code, it should be checked by the application.

How do 1D and 2D Barcode Scanners differ?

  • 1D bar code scanners can only read 1D bar codes.
  • 2D barcode scanners can read 1D and 2-D bar codes.

Read more ...